by Sue Bond
Choosing ornamental towels is not easy nowadays, since today you have a wide array of fabrics to choose from. To help you choose however, we can consider the binds made of satin and appliqués combined with bands, and over locked finished edges. Lace trim makes up the towels.
Terry cloth is a popular brand, which you can add Satin to offset the towels.
How to choose Satin upshot?
When selecting the Satin upshots you may want to purchase your own, or else handcraft the material. Use your towels, such as the toweling, or purchase a set and stitch reversing you course.
To start, tie the cloth using edges (Scallop) and then use your polyester textiles of satin at the hem, start binding, followed by accenting the fabric by serger binding. Once you finish, you can put in bands, which will detail your towels.
How do I choose materials for locks on my machine?
You will need to mingle the monograms, which you can purchase at any craft shop. Once you have the monograms, iron it onto the material, and in place. Raise the flat naps on the towel by brushing it lightly.
It is easy to invent your own towels. Otherwise, you can purchase a wide array of bath towels online, or at any department store. Keep in mind however, that creating your own towels is fun, and you get what you want.
Once you finish handcrafting your towel, you can add trim to your fabric. Use lace textile, since it will make a picture design.
Now let’s get to sewing:
You want to start out with a basic towel. Purchase fabrics, which are easy to wash. Consider taffeta, or you can choose polyesters or satin.
Once you have the towel, get rid of the stabilizer, and choose a selection of stitching threads that match your shades, as well as your cotton.
(1) Trim the image of your textile sewn onto the fabric to make amirror.
(2) Confiscate the extra model and use a craft pencil/pen to spot your selected areas to sew.
(3) Once you have cut the pattern, you want to place the other pattern (Stabilizer) should be smaller and glued to the other patterns.
Use the extra model and put it on the left surface of the textile.
(4) Stitch the textile, and begin cutting the material.
You will need your first section, which you want to learn room for the shape to fit its margin. Use craft pins to hold the material in place, starting at the right.
On the left side add pins and pin it extra textile. Make your first pattern, i.e. begin stitching.
(5) Stitch in a straight line and unfasten your pins.
(6) If you have access fabric, trim it. Avoid slicing your loops.
You are almost finished; all you need to do now is to repeat the steps three through five.
In step seven and eight you will need to prepare your machine, or needle and thread.
It is your choice whether you want to use a sewing machine, or handmaterials. If you want a zigzag effect, move your space closer. You want the tension of your needle thread loose, and position the bobbin to the left.
How to choose thread:
When you handcraft any materials, it is wise to coordinate your thread. If you purchased a plain white towel, then use white threads. Also, sew the satin, appliqué, using coordinated threads.
Once you choose your threads remove the stabilizer by tearing it away and removing it from the left side. Avoid pulling your loops. Now you are ready to bind and scallop your new towels, adding thematerials to the edge.
Click here to read more about DIY Home Tips for decorating your bathroom